After shooting pictures i finally was able to print. The first step was to choose my picture which i wanted to print. I cleaned my negatives by dipping it in a liquid called the "negative cleaner". next u wipe it down and place it in the enlarger. then i turned on the light to preview the picture to see if it was to light or dark. then turn off the light and set the timer to 2 seconds. take out the paper place it under the lens part,make sure not to turn on the light because it can expose the paper, after the paper is in place press the start button and wait for the 2 sec. 2 end. Then u have to place the paper in to the development for 1 minute then into the stop bath for 15 sec and the fixer for 2 minutes lastly you place it in the water for 5 minutes then let it to dry.